These parts have been designed and built by someone who uses them.  Having built our own kit planes and operated as a manufacturer's build assist manager, we know how good it feels when you get a part that is well built and presented properly to enable no fuss application.  

The highest quality materials have been used with the most modern techniques employed to manufacture each product.  

We welcome your feedback and are always happy to do our best to accommodate your needs.

Mounting bracket to suit the Medium and Large Air/Oil Separators.

This kit comes with bracket and 2 clamps.

This simple attractive naca scoop is strong and robust in construction.  It is an all carbon fiber construction.  Choose from the two most common sized scat hose fittings.

This naca scoop is perfect for: cabin air vent intake; cabin blast intake.

Sizes:
Width 2½", 60mm plus flange.
Length 7", 175mm plus flange.
Depth ½", 12mm.

Attaches easily to metal or fiberglass with glue, screws or rivets.
Simple step by step instructions for ease of installation (See below)

Naca Scoop Small Installation Instructions. Download PDF file.

Our unique internal aerofoil design generates a tunnel effect to increase airflow and provide things like higher manifold pressures.

Made from carbon fiber for weight reduction and strength. The scat hose connector is a filament wound tube virtually indestructible. No worries about doing up that hose clamp too tightly and cracking the scoop. We use epoxy, flame retardant resin.

The left hand version is usually for applications on the left side of your aircraft.
Perfect for: oil cooler intakes; induction intakes; intercooler intakes; large cabin air.

Sizes:
Width 4½", 110mm plus flange.
Length 14", 350mm plus flange.
Depth 2", 50mm.

Attaches easily to metal or fiberglass with glue, screws or rivets.
Instructions and templates for cut out supplied.
(See installation PDF file below)

Our unique internal aerofoil design generates a tunnel effect to increase airflow and provide things like higher manifold pressures. 

Made from carbon fiber for weight reduction and strength. The scat hose connector is a filament wound tube virtually indestructible. No worries about doing up that hose clamp too tightly and cracking the scoop. We use epoxy, flame retardant resin.

The right hand version is usually for applications on the right side of your aircraft.
Perfect for: oil cooler intakes; induction intakes; intercooler intakes; large cabin air.

Sizes:
Width 4½", 110mm plus flange.
Length 14", 350mm plus flange.
Depth 2", 50mm.

Attaches easily to metal or fiberglass with glue, screws or rivets.
Instructions and templates for cut out supplied.
(See installation PDF file below)

Our unique internal aerofoil design generates a tunnel effect to increase airflow and provide things like higher manifold pressures. 

Made from carbon fiber for weight reduction and strength. The scat hose connector is a filament wound tube virtually indestructible. No worries about doing up that hose clamp too tightly and cracking the scoop. We use epoxy, flame retardant resin.

The Universal version is for applications where you can best fit a center outlet hose.
Perfect for: oil cooler intakes; induction intakes; intercooler intakes; large cabin air.

Sizes:
Width 4½", 110mm plus flange.
Length 14", 350mm plus flange.
Depth 2", 50mm.

Attaches easily to metal or fiberglass with glue, screws or rivets.

Instructions and templates for cut out supplied.
(See installation PDF file below)

Naca Scoop Large Installation Instructions. Download PDF file.

This light weight, infused aerospace carbon fiber fairing is perfect for finishing off those items that protrude from your airframe. Clean up the air flow and be pleasing to the eye.

Perfect to clean up: cables; trim control rods; overflow hoses; general aerodynamic cover.

It comes in a carbon fiber finish. Can be attached to metal or fiberglass by glue, screws or rivets.

This product is now supplied in a black carbon finish - NOT white gel coat as shown.

Sizes: 
Width 1½", 37mm plus flange.
Length 7", 175mm plus flange.
Depth ⅞" 22mm.

This 13" diameter spinner is the ultimate mix of E glass and Carbon Fiber for super strong performance and durability. 
This kit comes complete with backing plate and all hardware. 
Universal kit to suit 2, 3 and 4 blade props.